Site Info Site Info
How To Check For Blowby On A Diesel

Alright, gather 'round, folks. I've got a tale to tell about a little thing called blowby, and how to check for it on your diesel engine. Now, I know what you're thinking, "Blowby? Isn't that some sort of fancy dance move?" Well, you're not entirely wrong. It's a bit like the engine's version of the Macarena, but with a lot less rhythm and a whole lot more oil.

What's Blowby, You Ask?

Imagine you're blowing bubbles in your favorite drink. Now, imagine those bubbles are made of oil and they're blowing through your engine. That, my friends, is blowby. It's when combustion gases leak past the piston rings and into the crankcase, taking a little oil party with them.

Why Should You Care?

Well, aside from the fact that it's just plain weird to have a mini oil rave in your engine, blowby can cause a few issues. It can lead to low oil pressure, increased oil consumption, and even engine damage if left unchecked. So, let's put on our detective hats and get to the bottom of this.

Gathering Your Tools

First things first, you're gonna need a few tools. Grab your trusty mechanic's gloves, a funnel, some fresh oil, and a blowby gauge. If you don't have one, you can make a DIY version using a clear piece of tubing and a bit of tape. It's like making a potato clock, but with less spuds and more grease.

Now, Let's Get Dirty

Start by warming up your engine. You want it to be nice and toasty, like a cozy cabin on a cold day. Then, turn it off and let it sit for a bit. We're talking about 15-30 minutes here, not a week-long vacation.

Engine Blow By Tool at Alan Darlington blogEngine Blow By Tool at Alan Darlington blog

Next, grab your funnel and pour some fresh oil into the engine until it reaches the full mark on the dipstick. You want to add about a quart more than what's needed to top it off. Why? Because we're about to have a little oil party, and you want to make sure there's enough to go around.

Now, start the engine and let it idle. You should see the oil level on the dipstick start to rise. If it doesn't, or if it rises slowly, that's a bad sign. It could mean your engine's got a leak, or worse, it's got a case of the blowbys.

What is Diesel Blow By? - Causes, Signs, & Fixes | Rx MechanicWhat is Diesel Blow By? - Causes, Signs, & Fixes | Rx Mechanic

Introducing the Blowby Gauge

Alright, now it's time to break out your fancy new blowby gauge. Attach it to the oil fill hole on your valve cover. If you made your own, just tape it on there real good. You want a tight seal, not a leaky faucet situation.

Start the engine and let it idle again. Look at that, it's like a little oil nightclub in there! The oil should start to rise in the gauge. If it rises rapidly, that's a sign of severe blowby. If it barely moves, that's a good sign. You can breathe easy, your engine's not doing the Macarena after all.

Checking For Engine Blow By at Bill Eley blogChecking For Engine Blow By at Bill Eley blog

What If It's Not Good News?

If your engine's got a case of the blowbys, don't panic. It's not the end of the world. It just means you've got some work to do. You might need to replace your piston rings or even your engine. But hey, at least you caught it early, right?

And remember, folks, prevention is the best medicine. Keep your engine in tip-top shape with regular oil changes and maintenance. That way, you'll never have to worry about blowby again. Unless, of course, you're into that sort of thing. No judgment here.

So there you have it, the lowdown on blowby. It's not as fun as the Macarena, but at least you know how to check for it now. Happy wrenching, and remember, always wear your safety glasses. You never know when a rogue oil bubble might pop up and blind you. Until next time, folks!